You can always contact us for more detailed information.
We will save on heating and air conditioning.
We will conduct a comprehensive diagnostic assessment using a thermal imager, a blower door, and a thermo-hygrometer. We will identify all defects and provide a calculation and proposal for rectifying them.
We will perform a thermal imaging inspection of your apartment, house, or any other property.
Order a thermal insulation inspection. We will conduct a comprehensive thermal imaging assessment of your building, identify all defects—even those that are well-hidden—and calculate your future heating and air conditioning costs.
Using thermal imaging and a blower door test, we will verify the quality of insulation, window, and door installation in new buildings; monitor contractor workmanship and material compliance with required specifications; and provide a detailed report, including an assessment of how the actual thermal insulation performance compares to the project design and GOST standards.
Have you forgotten the layout of your pipes, or is there a leak that isn't visible to the naked eye? We use a thermal imager to locate hidden utility lines and leaks.
We will check your electrical wiring for fire safety.
Do you want to sleep soundly without worrying about the fire safety of your building and equipment? Using a thermal imager and a clamp meter, we will inspect your wiring under load and identify any vulnerabilities that could spark a fire. The damage caused by a fire far outweighs the cost of addressing the underlying causes.
We will inspect industrial refrigeration and heating equipment, as well as other equipment that undergoes temperature changes during operation.
Is the temperature no longer stable? Do you need to check the condition of the lining or inspect industrial equipment without shutting it down? Using a thermal imager, we can diagnose issues and identify defects without stopping the equipment.
Do you have a pipeline leak but don't want to tear everything up or excavate the entire line? We will perform an acoustic diagnostic of the pipeline and pinpoint the exact location of the leak for you.
Flat roof leak detection and indoor water leak tracing using a thermal imager.
Do you have a flat roof and have discovered signs of a leak after the rain? We use a thermal imaging camera to inspect your roof and pinpoint where water is entering. We can also locate water leaks inside the building.
A comprehensive approach to improving building energy efficiency. We conduct diagnostics, propose options for rectifying defects, and carry out the necessary repairs.
Our staff members hold higher technical degrees and Level 2 thermographer certification.
Thermal imaging is performed only by personnel holding a higher technical education degree and having completed advanced training as a Level 2 thermographer.
We work exclusively with professional equipment that has been verified by a standardization and metrology center.
High-quality thermographic diagnostics can only be performed using professional, certified equipment.
We carry out all work in strict compliance with GOST standards and construction norms and regulations.
We perform thermographic inspections in accordance with GOST standards. If defects are detected, we demonstrate their non-compliance with current building regulations.
We provide a thermal imaging inspection report.
We are qualified specialists; our equipment has been verified by the Center for Metrology and Standardization and is listed in the State Register of approved equipment. Our report carries legal weight, and you can present it in court if necessary.
We perform an economic analysis of your building's energy efficiency.
Any project must make economic sense; we will calculate your heat loss, the cost of energy-efficiency upgrades, the savings achieved through thermal insulation, and the payback period.